Refer to the picture below to identify the different parts of the scanner in the setup process: Also refer to our video tutorial under “Barcode Scanning“.
Open the ‘Notes’ App from your iPad. Place the cursor where you want to enter data. Hold the CHS about 4 inches (10 cm) from the barcode and press and hold the trigger button. An aiming beam will appear for … Continued
Open OIS/ MIS iMobile app from your iPad/ iPhone. Tap on the Settings I Barcode Scanner. Activate Bluetooth and Tap on Settings. The Settings Screen should now show the status for Barcode Scanner as Bluetooth. The barcode scanner is now … Continued
To use OIS/MIS iMobile you must pair the scanner with the iPad following the below procedures: *You only need to pair the CHS (Cordless Hand Scanner) with your Apple device the first time you try to connect. *The CHS … Continued
To restore the CHS to its factory defaults, do the following: Method 1 Power on the CHS. While pressing the trigger button, briefly press and release the power button. After about 15 seconds, the CHS will beep. Release the … Continued