Before connecting the scanner to the iPad

1. To Charge-Connect the KDC200 to a powered USB port for about 4 hours.

2. Set scanner to SPP Mode- Scan the following barcode to put your scanner in SPP mode.

Screen Shot 2015-01-14 at 5.38.28 PM

 

The below image shows the parts of the KDC200 scanner.

Inicio

 

Step 1

 

Press up and down navigation buttons at the same time to open the scanner’s menu.

completo

 

Step 2

 

Select the BT Config option from the menu and press the trigger button.

pasop1

 

 

Step 3

 

Select the “ConnectDevice” option from the menu and press the trigger button.

pasop3

 

 

Step 4

 

Select the “Iphone” option from the menu and press the trigger button.

pasop4

 

 

 

Step 5

 

Select the “Save & Exit” option from the menu and press the trigger button.

pasop5

 

 

Step 6

 

Select the “Top Menu” option from the menu and press the trigger button.

 

salir

 

 

Step 7

 

Select the BT Service option from the menu and press the trigger button.

Paso12

 

 

Step 8

 

Select the “Discovering” option and press the trigger button.

Paso2

 

 

Step 9

 

While the scanner is searching for Bluetooth devices, turn on Bluetooth from the iPad settings.

 

Paso3

 

 

IMG_0774

 

 

 

 

 

Step 10

 

Select the device that you would like to connect to that is listed on the scanner’s menu.

Paso4

 

 

Step 11

 

Select the “Use Default” option, press the trigger button and the ipad will show the following message “Bluetooth Pairing Request”. Select “Pair”.

Paso5IMG_0775

 

 

 

Step 12

 

Next, please wait until the status of the scanner shows as “Connected” in the iPad.

Paso6IMG_0776

 

 

Step 13

 

Select the “Top Menu” option from the menu and press the trigger button.

Paso7

 

 

Step 14

 

Select the “Exit Menu” option from the menu and press the trigger button.

Paso8

 

 

Step 15

 

Open the WIS app from the iPad.

 

image (3)

 

 

Step 16

 

Tap on the WIS menu button located at the top left corner of the screen.

 

image (1)

 

 

Step 17

 

Tap on the settings.

 

image (2)

 

 

Step 18

 

Slide the KDCi switch button to activate it.

 

image