Before connecting the scanner to the iPad

1. To Charge-Connect the KDC200 to a powered USB port for about 4 hours.

2. Set scanner to HID Mode- Scan the following barcode to put your scanner in SPP mode.

code

 

 

 

The below image shows the parts of the KDC200 scanner.

Inicio

 

Step 1

 

Press up and down navigation buttons at the same time to open the scanner’s menu.

completo

Step 2

 

Select the BT Config option from the menu and press the trigger button.

pasop1

 

Step 3

 

Select the “ConnectDevice” option from the menu and press the trigger button.

pasop3

 

Step 4

 

Select the “Iphone” option from the menu and press the trigger button.

completa2

 

 

 

Step 5

 

Select the “Save & Exit” option from the menu and press the trigger button.

pasop5

 

Step 6

 

Select the “Top Menu” option from the menu and press the trigger button.

salir

 

Step 7

 

Select the BT Service option from the menu and press the trigger button.

Paso12

 

Step 8

 

Select the “Discovering” option and press the trigger button.

Paso2

 

Step 9

 

While the scanner is searching for Bluetooth devices, turn on Bluetooth from the iPad settings.

Paso3IMG_0774

Step 10

 

Select the device that you would like to connect to that is listed on the scanner’s menu.

Paso4

Step 11

 

Select the “Use Default” option, press the trigger button and the ipad will show the following message “Bluetooth Pairing Request”. Select “Pair”.

Paso5IMG_0775

Step 12

 

Next, please wait until the status of the scanner shows as “Connected” in the iPad.

Paso6IMG_0776

Step 13

 

Select the “Top Menu” option from the menu and press the trigger button.

Paso7

Step 14

 

Select the “Exit Menu” option from the menu and press the trigger button.

Paso8

 

 

 

 

 

Step 15

 

Open the OIS app from the iPad.

 

1

 

 

Step 16

 

Tap on the Settings

 

2

 

 

Step 17

 

Tap on the Barcode Scanner.

 

3

 

Step 18

 

Tap on Bluetooth/HID.

 

4

 

Step 19

 

Click on Yes.

 

5