Hardware

Configure the ZEBRA iMZ320 and Android Devices

1. Open Zebra Setup Utilities 2. Select your printer (if not already selected) from the list of printers 3. Click on the Configure Printer Connectivity button 4. Select Bluetooth from the options and then select Next 5. Change … Continued

How to pair the new Glove Scanner

Before connecting the scanner to the iPad 1. To Charge-Connect the KDC200 to a powered USB port for about 4 hours. 2. Set scanner to SPP Mode- Scan the following barcode to put your scanner in SPP mode. The … Continued

How to pair the new Glove Scanner with OIS IMOBILE

Before connecting the scanner to the iPad 1. To Charge-Connect the KDC200 to a powered USB port for about 4 hours. 2. Set scanner to HID Mode- Scan the following barcode to put your scanner in SPP mode. … Continued

Supported Hardware

OIS iMobile supports the devices listed below:

Parts of the (Socket CHS 7x) Scanner

Refer to the picture below to identify the different parts of the scanner in the setup process: Also refer to our video tutorial under “Barcode Scanning“.

A quick test before using it in OIS/MIS App

Open the ‘Notes’ App from your iPad. Place the cursor where you want to enter data. Hold the CHS about 4 inches (10 cm) from the barcode and press and hold the trigger button. An aiming beam will appear for … Continued

Preparing OIS/ MIS iMobile to use Socket CHS

Open OIS/ MIS iMobile app from your iPad/ iPhone. Tap on the Settings I Barcode Scanner. Activate Bluetooth and Tap on Settings. The Settings Screen should now show the status for Barcode Scanner as Bluetooth. The barcode scanner is now … Continued

Setting up the Socket CHS (Cordless Hand Scanner) with an iPad/ iPhone

To use OIS/MIS iMobile you must pair the scanner with the iPad following the below procedures: *You only need to pair the CHS (Cordless Hand Scanner) with your Apple device the first time you try to connect. *The CHS … Continued

Restoring Socket CHS Scanner to Factory Defaults

To restore the CHS to its factory defaults, do the following: Method 1 Power on the CHS. While pressing the trigger button, briefly press and release the power button. After about 15 seconds, the CHS will beep. Release the … Continued

Installing and configuring Zebra MZ320 WiFi Printer

Open you internet browser to the following link: www.oiscentral.com/Connect/Zebra -Download the file named Zebra_setup_Utilities.exe, to your computer. Double click on the Zebra_setup_Utilities.exe file to start the installation. Wait for a few seconds. Click next on the following dialogue box and … Continued

OIS official technical support database.